FEATURES
For mounting heights to 14′ (environmental separation) and 12′ (insect control).
The Berner Industrial Direct Drive 14 Air Curtain is durable with all welded construction and gray powder-coated exterior and mill aluminum inlet panel.
Used to save energy and keep temperatures stable and flying insects out when the doors are open.
- AMCA certified ambient models only
- Recommended for shipping and receiving doors, garage doors, cold storage doors, and baggage doors
- Engineered to perform and built to last
- Simple to install, operate, and maintain
- Made in U.S.A.
Berner is a UL Listed panel shop, authorized to build UL listed Motor Control Panels.
Corro-Duty and Washdown Duty versions are available.
Available in single lengths from 3′ to 16′
AMBIENT
- 15″ high x 18″ deep
- 1 hp single-speed motor(s) — direct drive (optional: two-speed)
- Gray powder-coated exterior with mill aluminum screen and access panels (optional: custom color or stainless)
- Wall and top mounting
- High-efficiency Pro-V Nozzle
- AMCA certified
ELECTRIC HEAT
- 15″ high x 18″ deep
- 1 hp single-speed motor(s) — direct drive (optional: two-speed)
- Gray powder-coated exterior with mill aluminum screen and access panels (optional: custom color or stainless)
- Wall and top mounting
- High efficiency Pro-V Nozzle
- Patented venturi open helical element with point suspension
- Thermal overload protection
- Galvanized steel frame
- Factory mounted heater control panel
- Alternate KW available
STEAM / HOT WATER HEAT
- 15″ high x 18″ deep
- 1 hp single-speed motor(s) — direct drive (optional: two-speed)
- Gray powder-coated exterior with mill aluminum screen and access panels (optional: custom color or stainless)
- Wall and top mounting
- High efficiency Pro-V Nozzle
Coil features:
- Galvanized steel casing
- 5/8″ copper tube with .035″ wall
- Aluminum fins
- Leak tested at 450 psi
INDIRECT GAS HEAT
Positive Indirect Gas
See mechanical drawings for dimensions.
- 1 hp single-speed motor(s) — direct drive (optional: two-speed)
- Gray powder-coated exterior with mill aluminum screen and access panels (optional: custom color or stainless)
- Top mounting only
- High efficiency Pro-V Nozzle
- Factory mounted duct transition with bottom access panels
- Field installed CSA Certified indirect gas heater(s):
- Aluminized steel heat exchanger (Optional: Stainless)
- Steel cabinet with beige finish
- Spark ignited pilot
- Power venter
- Separate 120V power supply required (optional: transformer for single point connection)
Intelliswitch
Intelliswitch for Industrial Series Air Curtains
Optional
- The Intelliswitch (digital controller) allows the user to program the air curtain to run for a set time in between door cycles, to operate on a schedule, and for air curtains with heat – to run until the thermostat set point is satisfied, and more..
- Several pre-set programs to choose from or create one tailored to the application
Berner AIR and Intelliswitch Package
Optional
- Includes BACnet-IP Support
- Program, operate & monitor Industrial Air Curtains via Berner’s mobile app
- Access reporting on energy & cost savings, door operations, and more
Accessories
This model requires a separate Activation Switch. All air curtains using control panels require an Activation Switch to be ordered with the panel. Models with Electric Heat include a factory mounted control panel.
Control Panels
Standard location: Factory installed on left hand end plate of air curtain. Optional locations: Right hand end plate or remote mounted.
Single Phase Control Panels:
A single phase control panel is required when:
- A time delay is used
- 24 volt control is used
- When motor quantities exceed: (1) 1 hp @ 120V or (2) 1 hp @ 208-240V
An activation switch must be selected along with the panel for activation of the air curtain.
Standard Control Panel Construction:NEMA 4/12 Enclosure, Motor Contactor (factory wired), Terminal Strip, Fusing (as required), Time Delay (as required).
Optional control panel enclosure constructions: Poly Fiberglass, Aluminum, Stainless Steel
Three Phase Control Panels:
All three phase power supplies require a three phase control panel and an activation switch.
Standard Control Panel Construction:NEMA 4/12 Enclosure, Motor Contactor (factory wired), Terminal Strip, Fusing (as required), and Time Delay or 120V Control Transformer (as required)
Optional control panel enclosure constructions: Poly Fiberglass, Aluminum, Stainless Steel
Location Specific Options
Corro-Duty and Washdown Duty versions are available.
Control Packages
Electric Heated Models Only
Models with Electric Heat include a factory mounted control panel.
Basic Control Package:
Recommended for openings where the door stays open for an extended period or does not have a lot of traffic.
- Air curtain turns on when door is opened and shuts off when door is closed.
- Consists of a door switch (roller, plunger, whisker arm, magnetic reed, or heavy duty magnetic reed style) and 24 volt control.
Deluxe Control Package:
Recommended for high traffic openings.
- Air curtain turns on when door is opened, when the door closes, the unit remains on until set delay time expires.
- Consists of a door switch (roller, plunger, whisker arm, magnetic reed, or heavy duty magnetic reed style), a time delay, and 24 volt control.
Electrical Accessories
- Door Switches: roller, plunger, whisker arm, magnetic reed, heavy duty magnetic reed style
- Hand/Off/Automatic switches
- Disconnect Switch(es) – toggle disconnects based on number of power supplies required
- Remote Thermostat & Locking Cover
- Indirect Gas Heater Transformer – remote mounted
Mechanical Accessories
- Wall support brackets
- Extension brackets
- Floor mounting brackets
- Vertical tandem mounting bracket
- ½” Washable filters
- Nozzle extensions
Berner IntelliswitchTM
Digital Controller
- Takes the place of Control Packages
- Simplified pre-set programs
- Single speed motor operation
- LED clock display
- Low voltage circuit for unit activation
- Serial network connection available
- External thermostat provision
- Commercial grade components with operating range: 0° – 70°C or 32° – 158°F
- RoHS compliant
- Temperature probe (heated units only)
CONTROL PANEL is required when an Intelliswitch is used
Berner AIRTM Smart Controller & Berner App, includes BACnet
- Requires IntelliswitchTM
- Program, operate & monitor via smartphone / tablet
- BACnet-IP support
- Remote troubleshooting
- Secure: best practices for cyber security protocols followed
NOTE: Requires on-site, secure wireless connection (provided by others).
