FEATURES
For mounting heights up to 16′ (environmental separation) and 14′ (insect control).
The Berner Industrial Belt Drive 16 Air Curtain has a durable, all welded construction with gray powder-coated aluminized steel exterior and a removable lower section for simplified access to internal components.
Used to save energy and keep temperatures stable and flying insects out when the doors are open.
- Recommended for automotive manufacturing, shipping and receiving doors, and garage doors
- Engineered to perform and built to last
- Simple to install, operate, and maintain
- Made in U.S.A.
Berner is a UL Listed panel shop, authorized to build UL listed Motor Control Panels.
Available in single lengths from 5′ to 16′
AMBIENT
- 21″ high x 32 ¼” deep
- Single-speed T.E.F.C. motor — belt drive
- Gray powder-coated exterior (optional: custom color or stainless)
- Split cabinet construction for fan assembly removal
- Removable access panels
- Top mounting only
- High efficiency Pro-V Nozzle
- Motor location top right (optional: top left, front left or front right)
STEAM/HOT WATER HEAT
- 21″ high x 32 ¼” deep
- Single-speed T.E.F.C. motor — belt drive
- Gray powder-coated exterior (optional: custom color or stainless)
- Split cabinet construction for fan assembly removal
- Removable access panels
- Top mounting only
- High efficiency Pro-V Nozzle
- Motor location top right (optional: top left, front left or front right)
Coil features:
- Galvanized steel casing
- 5/8″ copper tube with .035″ wall
- Aluminum fins
- Leak tested at 450 psi
DIRECT GAS HEAT
See mechanical drawings for dimensions.
- Single-speed T.E.F.C. motor — belt drive
- Gray powder-coated exterior (optional: custom color or stainless)
- Split cabinet construction for fan assembly removal
- Removable access panels
- Top mounting only
- High efficiency Pro-V Nozzle
- Motor location top right (optional: top left, front left or front right)
- Factory mounted duct transition with bottom access panels
- Factory mounted modulating direct-fired heater with FM/IRI gas train
- Factory mounted wired heater control cabinet
- Steel cabinet with gray finish
- Spark ignited intermittent pilot
POSITIVE INDIRECT GAS HEAT
See mechanical drawings for dimensions.
- Single-speed T.E.F.C. motor — belt drive
- Gray powder-coated exterior (optional: custom color or stainless)
- Split cabinet construction for fan assembly removal
- Removable access panels
- Top mounting only
- High efficiency Pro-V Nozzle
- Motor location top right (optional: top left)
- Factory mounted duct transition with bottom access panels
- Field installed CSA Certified indirect gas heater(s):
- Aluminized steel heat exchanger (optional: stainless)
- Steel cabinet with beige finish
- Spark ignited pilot
- Power venter
- Separate 120V power supply required (optional: transformer for single point connection)
Intelliswitch
Intelliswitch for Industrial Series Air Curtains
Optional
- The Intelliswitch (digital controller) allows the user to program the air curtain to run for a set time in between door cycles, to operate on a schedule, and for air curtains with heat – to run until the thermostat set point is satisfied, and more..
- Several pre-set programs to choose from or create one tailored to the application
Berner AIR and Intelliswitch Package
Optional
- Includes BACnet-IP Support
- Program, operate & monitor Industrial Air Curtains via Berner’s mobile app
- Access reporting on energy & cost savings, door operations, and more
Accessories
This model requires an Activation Switch and a Control Panel.
Control Panels
Three Phase Control Panels:
All three phase power supplies require a three phase control panel, remote (standard) or factory mounted, and an activation switch.
Standard control panel construction: NEMA 4/12 Enclosure, Motor Contactor (factory wired), Terminal Strip, Motor Overload (one per motor), and 120V Control Transformer
Optional control panel enclosure constructions: Poly Fiberglass, Aluminum, Stainless Steel
- Door Switches: roller, plunger, whisker arm, or heavy duty magnetic reed style
- Hand/Off/Automatic Switches
- Start/Stop Push Button(s)
- Summer/Winter Switches
- Summer/Off/Winter Switches
- Disconnect Switch(es) – toggle disconnects based on number of power supplies required
- Remote Thermostat & Locking Cover
- Time Delay (standard in Indirect Gas Fired control panel)
Electrical Accessories
- Indirect Gas Heater Transformer
Mechanical Accessories
- Wall support brackets
- Extension brackets
- Vertical tandem mounting bracket
- 2” Washable aluminum filters with frame, for ambient, steam & hot water heated air curtains only
Direct Gas Heat Accessories
- 10#-20# First stage gas pressure regulator – factory piped to gas train
- Ford gas train per SN 9728 with Dungs VDK
- Vertical burner box (top air inlet)
- Honeywell flame safety RM7896C1010 in lieu of Fireye
- Eaton 8411K13 remote flame failure reset switch and MED3 Board
Berner IntelliswitchTM
Digital Controller
- Takes the place of Control Packages
- Simplified pre-set programs
- Single speed motor operation
- LED clock display
- Low voltage circuit for unit activation
- Serial network connection available
- External thermostat provision
- Commercial grade components with operating range: 0° – 70°C or 32° – 158°F
- RoHS compliant
- Temperature probe (heated units only)
CONTROL PANEL is required when an Intelliswitch is used
Berner AIRTM Smart Controller & Berner App, includes BACnet
- Requires IntelliswitchTM
- Program, operate & monitor via smartphone / tablet
- BACnet-IP support
- Remote troubleshooting
- Secure: best practices for cyber security protocols followed
NOTE: Requires on-site, secure wireless connection (provided by others).
