For mounting heights to 16′ (environmental separation) and 14′ (insect control).

The Berner Industrial Washdown 10 Air Curtain is durable, with all-welded construction, a gray powder-coated exterior of stainless steel.

Used to save energy and keep temperatures stable and flying insects out when the doors are open.

  • Specifically built for Washdown applications
  • Engineered to perform and built to last
  • Simple to install, operate, and maintain
  • Made in U.S.A.

Berner is a UL Listed panel shop, authorized to build UL listed Motor Control Panels.

Available in single lengths from 5′ to 16′

Washdown Details


For industry applications requiring protection against corrosion caused by severe environmental operating conditions including petro-chemical plants, mines, foundries, pulp and paper plants, waste management facilities, chemical plants, and tropical climates.

Unit Features: 

Cabinet and internal components including fans and blower shafts are stainless steel. Industrial units already use waterproof wiring compartments.  

Motor Features:

Single speed, corrosion resistant epoxy finish, sealed pre lubricated bearings, oversized rotatable cast iron conduit box, cast iron frames, Neoprene V-ring sling, heavy duty cast iron construction, enhanced ingress protection, moisture resistant copper windings, Class F insulation, tropicalized, stainless steel nameplate and corrosion resistant hardware.


This model requires a separate Activation Switch. All air curtains using control panels require an Activation Switch to be ordered with the panel. 

Control Panels

Standard location: Factory installed on left hand end plate of air curtain.

Three Phase Control Panels:

All three phase power supplies require a three phase control panel and an activation switch.

Standard Control Panel Construction: NEMA 4/12 Enclosure, Motor Contactor (factory wired), Terminal Strip, Fusing (as required), and Time Delay or 120V Control Transformer (as required).