FEATURES

For mounting heights up to 30′ (environmental separation) and 28′ (insect control).

The Berner Industrial Belt Drive 30 Air Curtain has a durable, all welded construction with gray powder-coated aluminized steel exterior and removable lower section for simplified access to internal components.

Used to save energy and keep temperatures stable and flying insects out when the doors are open.

  • AMCA certified ambient models only
  • Recommended for shipping, receiving, garage, and railroad bay bay doors, and automotive manufacturing
  • Engineered to perform and built to last
  • Simple to install, operate, and maintain
  • Made in U.S.A.

Berner is a UL Listed panel shop, authorized to build UL listed Motor Control Panels.

Available in single lengths from 8′ to 16′

AMBIENT

  • 39″ high x 30″ deep
  • Single-speed T.E.F.C. motor — belt drive
  • Gray powder-coated exterior (optional: custom color or stainless)
  • Split cabinet construction for fan assembly removal
  • Removable access panels
  • Top mounting only
  • High-efficiency Pro-V Nozzle
  • Motor location top right (optional: top left, front left or front right)
  • AMCA certified

STEAM/HOT WATER HEAT

  • 39″ high x 30″ deep
  • Single-speed T.E.F.C. motor — belt drive
  • Gray powder-coated exterior (optional: custom color or stainless)
  • Split cabinet construction for fan assembly removal
  • Removable access panels
  • Top mounting only
  • High efficiency Pro-V Nozzle
  • Motor location top right (optional: top left, front left or front right)
Coil features:
  • Galvanized steel casing
  • 5/8″ copper tube with .035″ wall
  • Aluminum fins
  • Leak tested at 450 psi

DIRECT GAS HEAT

See mechanical drawings for dimensions.

  • Single-speed T.E.F.C. motor — belt drive
  • Gray powder-coated exterior (optional: custom color or stainless)
  • Split cabinet construction for fan assembly removal
  • Removable access panels
  • Top mounting only
  • High efficiency Pro-V Nozzle
  • Motor location top right (optional: top left, front left or front right)
  • Factory mounted duct transition with bottom access panels
  • Factory mounted modulating direct-fired heater with FM/IRI gas train
    • Factory mounted wired heater control cabinet
    • Steel cabinet with gray finish
    • Spark ignited intermittent pilot

Accessories

This model requires an Activation Switch and a Control Panel.

Control Panels

Three Phase Control Panels:

All three phase power supplies require a three phase control panel, remote (standard) or factory mounted, and an activation switch.

Standard control panel construction: NEMA 4/12 Enclosure, Motor Contactor (factory wired), Terminal Strip, Motor Overload (one per motor), and 120V Control Transformer

Optional control panel enclosure constructions: Poly Fiberglass, Aluminum, Stainless Steel

Control Panel Accessories

  • Door Switches: roller, plunger, whisker arm, or heavy duty magnetic reed style
  • Hand/Off/Automatic Switches
  • Start/Stop Push Button(s)
  • Summer/Winter Switches
  • Summer/Off/Winter Switches
  • Disconnect Switch(es) – toggle disconnects based on number of power supplies required
  • Remote Thermostat & Locking Cover
  • Time Delay

Direct Gas Heat Accessories

  • 10#-20# First stage gas pressure regulator – factory piped to gas train
  • Ford gas train per SN 9728 with Dungs VDK
  • Vertical burner box (top air inlet)
  • Honeywell flame safety RM7896C1010 in lieu of Fireye
  • Eaton 8411K13 remote flame failure reset switch and MED3 Board